電控柜與清洗主機相分離，杜絕水的泄漏和噴濺以防電器件受潮。
The electric control cabinet is separated from the cleaning host to prevent water leakage and splashing to prevent electrical parts from being damped.
合理布局電控柜，留出合理通風空間
Reasonably arrange the electric control cabinet and reserve reasonable ventilation space
在柜內加裝帶濾網的通風扇，加裝帶濾網的百葉窗等
Install ventilation fan with filter screen and shutter with filter screen in the cabinet
加強管道布線和設備連線時的防水處理
Strengthen the waterproof treatment when piping and equipment wiring
針對現場實際，留出可變高度的走行式電控柜地腳; 為加強系統的內在可靠性，加強了以 PLC 為核心的抗干擾措施
According to the actual situation on site, set aside walking type electric control cabinet feet with variable height; In order to strengthen the internal reliability of the system, anti-interference measures with PLC as the core have been strengthened
軸承清洗常見應用方式
Common application methods of bearing cleaning

由于軸承零件的大小不一，在選擇清洗機的時候需要選擇不同的清洗機，前序加工的方式，使得殘留在零件表面的污漬不盡相同。這樣直接影響到清洗效果，在選擇碳氫清洗機時也當考慮到清洗機的清洗方式和單槽或者多槽的清洗是否能夠滿足清洗需要。目前清洗機設備廠已經積累了足夠的經驗，可以根據清洗需要定制合適的設備。通常情況下，軸承清洗應用中，典型應用有以下幾種碳氫清洗機：
Due to the different sizes of bearing parts, different cleaning machines need to be selected when selecting cleaning machines. The way of previous processing makes the stains left on the surface of parts different. This directly affects the cleaning effect. When selecting a hydrocarbon washer, consider whether the cleaning method of the washer and the cleaning of single tank or multiple tanks can meet the cleaning needs. At present, the washer equipment factory has accumulated enough experience to customize appropriate equipment according to the cleaning needs. In general, in the application of bearing cleaning, the following hydrocarbon cleaning machines are typical applications:
通過式碳氫清洗設備
Through type hydrocarbon cleaning equipment
通過式清洗目前在軸承清洗行業中應用較為普遍，此類清洗設備的應用非常靈活，根據軸承和被清洗物的多少確定不同的清洗流程，將噴淋漂洗不同組合清洗，后由熱風或者其他方式干燥，清洗效率較高，可以批量清洗零件，缺點是設備較大，占空間較大。
At present, through cleaning is widely used in the bearing cleaning industry. The application of such cleaning equipment is very flexible. Different cleaning processes are determined according to the number of bearings and objects to be cleaned. Different combinations of spray rinsing are used for cleaning. Finally, hot air or other methods are used for drying. The cleaning efficiency is high, and parts can be cleaned in batches. The disadvantage is that the equipment is large and takes up large space.
對于潔凈度要求較高的軸承清洗，使用三槽式或者多槽式碳氫清洗機。此設備采用抽真空超聲清洗，搖動漂洗，抽真空狀態下真空蒸汽清洗，真空干燥等步驟，超聲波清洗氣相清洗組合，零件潔凈度更高。真空情況下干燥和回收更節能。
For bearing cleaning with high cleanliness requirements, use a three groove or multi groove hydrocarbon cleaning machine. This equipment adopts vacuum ultrasonic cleaning, shaking rinsing, vacuum steam cleaning under vacuum state, vacuum drying and other steps. The combination of ultrasonic cleaning and vapor cleaning makes the parts cleaner. Drying and recycling in vacuum can save energy.
以上的精彩內容來自：碳氫清洗機濟南科爾超聲波設備有限公司專注通風管道多年，質量保證,服務完善,歡迎更多客戶點擊：http://www.mpre.cn
The above highlights come from: Jinan Keer Ultrasonic Equipment Co., Ltd. has been focusing on ventilation ducts for many years, with quality assurance and perfect service. Welcome more customers to click: http://www.mpre.cn