1.在塑料筐中盛入純凈水，并放入待洗物品，蓋上蓋子；

1. Pour purified water into a plastic basket, place items to be washed, and cover with a lid;

注意：清洗物待清洗部分需充分浸入水中，且水位不得過高。

Attention: The part of the cleaning material to be cleaned should be fully immersed in water, and the water level should not be too high.

2.連接電源，指示燈閃爍，確認機器已經通電，確保清洗槽內有適量純凈水；

2. Connect the power supply, the indicator light flashes, confirm that the machine is powered on, and ensure that there is an appropriate amount of pure water in the cleaning tank;

3.待機狀態下，調整時間和功率；

3. In standby mode, adjust the time and power;

5.全部設定完畢后，再次按動功率下方“ON”鍵即可啟動；

5. After all settings are completed, press the "ON" button below the power again to start;

4.清洗完畢后，及時將塑料筐中的污水倒入洗手臺；

4. After cleaning, promptly pour the sewage from the plastic basket into the washbasin;

5.及時在清洗槽中補充純凈水；

5. Timely supplement pure water in the cleaning tank;

6.歸位。

6. Return to position.

注意：

be careful:

1.保持清洗槽內水質干凈；

1. Keep the water quality in the cleaning tank clean;

2.注意清洗槽內水位，避免無水、少水及多水狀態下開機工作；

2. Pay attention to the water level in the cleaning tank to avoid starting up and working in dry, low, or high water conditions;

3.在保證清洗物件潔凈的前提下，盡可能間斷性工作；

3. Work intermittently as much as possible while ensuring the cleanliness of the cleaned items;

（一般控制在5～10分鐘/次，連續工作時長不宜超過30mins）

(Generally controlled at 5-10 minutes per time, and the continuous working time should not exceed 30mins)

4.請勿使用酒精、汽油等易燃溶液及強堿、強酸等腐蝕性溶液；

4. Do not use flammable solutions such as alcohol and gasoline, as well as corrosive solutions such as strong alkalis and acids;

5.注意用電。

5. Pay attention to electricity usage.

本文由超聲波清洗機友情奉獻.更多有關的知識請點擊: http://www.mpre.cn真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from ultrasonic cleaning machines. For more related knowledge, please click: http://www.jnthcsb.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned